Select Page

DAIO™ Fixing Instructions

Covering The DAIO™ Original, DAIO PRO™ & DAIO SOLO™ Models

NB. The DAIO™ chassis is designed to connect firmly with the mounting bracket. If you find it a little stiff to disengage / engage in one push down / pull up motion then it will be easier if you do so one end at a time, in a ‘rocking’ type motion.

HORIZONTAL FIXING POSITION: (TEMPORARY)

The DAIO™ Original is pre-assembled for horizontal use

The DAIO - Fixing Instructions for a Horizontal Surface

1. DAIO™ main chassis
2. Silicone sleeve
3. Safety securing hand screws (x2)
4. Bracket
5. Horizontal or vertical surface
6. Silicone safety bar
7. Holding rivets
8. Key hole grips

• Remove from the box
• Slide your DAIO™ into place on your horizontal surface (see diagram)
• Hand tighten the 2 safety securing screws enough to hold your DAIO™ securely in place *
• Do not over tighten or use any mechanical device or tool to tighten the safety securing screws

* Contains optional protective end caps for safety securing screws (Keep caps away from children as they may be a choking hazard)

VERTICAL FIXING POSITION: (TEMPORARY)

The DAIO - Fixing Instructions for a Vertical Surface

• Lightly push the bracket downwards to release from horizontal position and the DAIO™ keyhole grips
• Remove the safety bar by sliding to the left or right
• Rotate the bracket so the open side is facing down and corresponding holding rivets are facing the DAIO™
• Re-attach the bracket by sliding the holding rivets into the keyhole grips
• Lightly push the bracket upwards ensuring a snug fit of the holding rivets in the keyhole grips
• Slide your DAIO™ on to the vertical surface (see diagram)
• Hand tighten the 2 safety securing screws enough to hold your DAIO™ securely in place *
• Do not over tighten or use any mechanical device or tool to tighten the safety securing screws
• Re-attach the safety bar to your DAIO™

* Contains optional protective end caps for safety securing screws (Keep caps away from children as they may be a choking hazard)

PERMANENT FIXING POSITION: (VERTICAL)

The DAIO - Instructions for Permanent Fixing to a Vertical Surface

• Remove the bracket by gently releasing the holding rivets from the DAIO™
• Using approved fixing devices attach to vertical surface
• Ensure your DAIO™ is horizontally level before finally fixing in place

Installing The DAIO PRO™ & DAIO SOLO™ Models In Your Home Or Business

 

Click on either image below to watch the Installation Guide video for your chosen model

Installing The DAIO PRO in Your Home or Business
Installing The DAIO SOLO in Your Home or Business